D-Link DWS-3160-24TC - Page 831

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
827
high-order six bits of the Service Type octet in the IP header. The IP DSCP is configured
by a possible selection of one of the DSCP keywords or a numerical values.
af11 - Specifies that the IP DiffServ Code Point value will be set as 'af11'.
af12 - Specifies that the IP DiffServ Code Point value will be set as 'af12'.
af13 - Specifies that the IP DiffServ Code Point value will be set as 'af13'.
af21 - Specifies that the IP DiffServ Code Point value will be set as 'af21'.
af22 - Specifies that the IP DiffServ Code Point value will be set as 'af22'.
af23 - Specifies that the IP DiffServ Code Point value will be set as 'af23'.
af31 - Specifies that the IP DiffServ Code Point value will be set as 'af31'.
af32 - Specifies that the IP DiffServ Code Point value will be set as 'af32'.
af33 - Specifies that the IP DiffServ Code Point value will be set as 'af33'.
af41 - Specifies that the IP DiffServ Code Point value will be set as 'af41'.
af42 - Specifies that the IP DiffServ Code Point value will be set as 'af42'.
af43 - Specifies that the IP DiffServ Code Point value will be set as 'af43'.
be - Specifies that the IP DiffServ Code Point value will be set as 'be'.
cs0 - Specifies that the IP DiffServ Code Point value will be set as 'cs0'.
cs1 - Specifies that the IP DiffServ Code Point value will be set as 'cs1'.
cs2 - Specifies that the IP DiffServ Code Point value will be set as 'cs2'.
cs3 - Specifies that the IP DiffServ Code Point value will be set as 'cs3'.
cs4 - Specifies that the IP DiffServ Code Point value will be set as 'cs4'.
cs5 - Specifies that the IP DiffServ Code Point value will be set as 'cs5'.
cs6 - Specifies that the IP DiffServ Code Point value will be set as 'cs6'.
cs7 - Specifies that the IP DiffServ Code Point value will be set as 'cs7'.
ef - Specifies that the IP DiffServ Code Point value will be set as 'ef'.
other - Specifies that a custom IP DiffServ Code Point value will be used.
<int 0-63> - Enter a custom IP DiffServ Code Point value here. This value must be
between 0 and 63.
Restrictions
Only Administrators can issue this command.
Example
To create a new rule, for an existed IP extended ACL:
DWS-3160-24PC:admin#config wireless access_list ip extended 100 add_rule 1 type
permit match_every true
Command: config wireless access_list ip extended 100 add_rule 1 type permit
match_every true
Success.
DWS-3160-24PC:admin#config wireless access_list ip extended 100 add_rule 2 type
permit match_every false src_layer4_port http protocol tcp
Command: config wireless access_list ip extended 100 add_rule 2 type permit
match_every false src_layer4_port http protocol tcp
Success.
DWS-3160-24PC:admin#
To update the protocol value of a specified rule of a IP extended ACL to be IGMP: