D-Link DWS-3160-24TC - Page 869

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
865
94-3 show wireless channel_plan
Description
This command is used to display the configuration for automatic channel planning.
Format
show wireless channel_plan [an | bgn]
Parameters
an - Specifies that the configured wireless channel plan mode for 802.11a/n will be displayed.
bgn - Specifies that the configured wireless channel plan mode for 802.11b/g/n will be displayed.
Restrictions
None.
Example
To display the configured wireless channel plan mode for 802.11a/n
DWS-3160-24PC:admin#show wireless channel_plan an
Command: show wireless channel_plan an
---------------------------------------------------------------------
* Channel Plan *
---------------------------------------------------------------------
802.11a Channel Configuration:
Channel Plan Mode : Manual
Channel Plan Interval (hours) : 24
Channel Plan Fixed Time (hh:mm) : 00:00
Channel Plan History Depth : 10
DWS-3160-24PC:admin#
94-4 show wireless channel_plan history
Description
This command is used to display a history for the automatic channel algorithm.
Format
show wireless channel_plan history [an | bgn]
Parameters
history - Specifies to display the history of the automatic channel algorithm. The channel plan
type argument must be specified. A channel history is maintained separately for each radio
frequency.
an
- Specifies that the configured wireless channel plan mode for 802.11a/n will be displayed.
bgn - Specifies that the configured wireless channel plan mode for 802.11b/g/n will be displayed.