D-Link DWS-3160-24TC - Page 874

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
870
show wireless status
show wireless switch [<ipaddr> | local] {[statistics | client]}
show wireless trap
show wireless tunnel_mtu
95-1 enable wireless
Description
This command is used to enable the Wireless Switch functionality.
Format
enable wireless
Parameters
None.
Restrictions
Only Administrators can issue this command.
Example
To enable the Wireless Switch functionality:
DWS-3160-24PC:admin#enable wireless
Command: enable wireless
Success.
DWS-3160-24PC:admin#
95-2 disable wireless
Description
This command is used to disable the Wireless Switch functionality.
Format
disable wireless
Parameters
None.
Restrictions
Only Administrators can issue this command.