D-Link DWS-3160-24TC - Page 891

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
887
DWS-3160-24PC:admin#config wireless ip_control_port 57775
Command: config wireless ip_control_port 57775
Success.
DWS-3160-24PC:admin#
95-24 config wireless mac_authentication_mode
Description
This command is used to configure the client MAC authentication mode for the Switch. The mode
indicates whether MAC addresses, in the Known Client database, are granted or denied access.
The MAC authentication mode is applied to the Known Client database configured either locally or
on the RADIUS server.
Format
config wireless mac_authentication_mode [white_list | black_list]
Parameters
white_list - Specifies that access is granted only to clients with MAC addresses in the Known
Client database. This is the default option.
black_list - Specifies that access is denied to clients with MAC addresses in the Known Client
database.
Restrictions
Only Administrators can issue this command.
Example
To configure that MAC authentication mode as ‘black_list’:
DWS-3160-24PC:admin#config wireless mac_authentication_mode black_list
Command: config wireless mac_authentication_mode black_list
Success.
DWS-3160-24PC:admin#
95-25 config wireless peer_group
Description
This command is used to indicate the peer group for this Switch. There may be more than one
group of peer Switches on the same WLAN. A peer group is created by configuring all peers within
the group with the same identifier.
Format
config wireless peer_group [<int 1-255> | default]