D-Link DWS-3160-24TC - Page 936

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
932
DWS-3160-24PC:admin#show wireless wids_security client
Command: show wireless wids_security client
Rogue detected trap interval : 300 seconds
Rogue-Not in OUI database : Disable
Rogue-Not in Known Client list : Disable
Rogue-Exceeds Auth Req : Enable
Rogue-Exceeds DeAuth Req : Enable
Rogue-Exceeds Probe Req : Enable
Rogue-Exceeds Failed auth : Enable
Rogue-Auth with unknown AP : Disable
Client Threat Mitigation : Disable
De-auth threshold interval : 60 seconds
De-auth threshold value : 10
Auth threshold interval : 60 seconds
Auth threshold value : 10
Probe threshold interval : 60 seconds
Probe threshold value : 120
Auth failure threshold : 5
Known DB Location : Local
DWS-3160-24PC:admin#
96-33 show wireless wids_security client rogue_test_descriptions
Description
This command is used to display to display the WIDS client rogue classification test identifier
descriptions.
Format
show wireless wids_security client rogue_test_descriptions
Parameters
None.
Restrictions
None.
Example
To display the WIDS client rogue classification test descriptions: