D-Link DWS-3160-24TC - Chapter 97 Password Recovery Command List

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
935
Chapter 97 Password Recovery
Command List
enable password_recovery
disable password_recovery
show password_recovery
97-1 enable password_recovery
Description
This command is used to enable the password recovery mode.
Format
enable password_recovery
Parameters
None.
Restrictions
Only Administrators can issue this command.
Example
To enable the password recovery mode:
DWS-3160-24PC:admin# enable password_recovery
Command: enable password_recovery
Success.
DWS-3160-24PC:admin#
97-2 disable password_recovery
Description
This command is used to disable the password recovery mode.
Format
disable password_recovery