DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
936
Parameters
None.
Restrictions
Only Administrators can issue this command.
Example
To disable the password recovery mode:
DWS-3160-24PC:admin# disable password_recovery
Command: disable password_recovery
Success.
97-3 show password_recovery
Description
This command is used to display the password recovery state.
Format
show password_recovery
Parameters
None.
Restrictions
Only Administrators can issue this command.
Example
To display the password recovery state:
DWS-3160-24PC:admin#show password_recovery
Command: show password_recovery
Running Configuration : Enabled
NV-RAM Configuration : Enabled