DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
144
Figure 5-54 ERPS (Edit Ring) Window
The fields that can be configured are described below:
Parameter Description
Instance ID
Select the checkbox and enter the ERP instance number here. This value must
be between 1 and 32. Select the Specify radio button to configure this parameter
as per normal. Select the None radio button to revert this parameter to the default
setting.
Sub Ring Name
Select the checkbox and enter the physical ring’s sub-ring name here. This name
can be up to 32 characters long. Select the Specify radio button to configure this
parameter as per normal. Select the None radio button to revert this parameter to
the default setting.
Port0
Select the checkbox and then select the Switch’s unit ID and the port number that
will be the first ring port of the physical ring. Select the Specify radio button to
configure this parameter as per normal. Select the None radio button to revert this
parameter to the default setting.
Port1
Select the checkbox and then select the Switch’s unit ID and the port number that
will be the second ring port of the physical ring. Select the None option, from the
drop-down menu, specifies that the inter-connected node is a local node endpoint
of an open ring. Select the Specify radio button to configure this parameter as per
normal. Select the None radio button to revert this parameter to the default
setting.
Ring ID
Select the checkbox and enter the ring ID here. The range is from 1 to 239.
Select the Specify radio button to configure this parameter as per normal. Select
the None radio button to revert this parameter to the default setting.
Ring Type
Select the checkbox and then select the ring type here. Options to choose from
are Major Ring and Sub Ring.
Click the Back button to discard the changes made and return to the previous window.
Click the Apply button to accept the changes made.
After click the Show Detail button, the following window will appear.
To Next Page
Loading...
