DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
318
To view the following window, click Security > TACACS+ > TACACS+ Group Server Settings, as shown below:
Figure 9-36 TACACS+ Group Server Settings Window
The fields that can be configured are described below:
Parameter Description
Group Server Name
Enter the TACACS+ group server’s name here. This name can be up to 32
characters long.
IPv4 Address
Enter the group server’s IPv4 address here.
IPv6 Address
Enter the group server’s IPv6 address here.
Click the Add button to add a new entry based on the information entered.
Click the Show Detail button to view and configure more detailed settings for the TACACS+ group server.
Click the Delete button to remove the specified entry.
After clicking the Show Detail button, the following page will be available.
Figure 9-37 TACACS+ Group Server Settings (Show Detail) Window
The fields that can be configured are described below:
Parameter Description
IPv4 TACACS+ Source
Interface Name
Enter the name of the IPv4 TACACS+ source interface here.
IPv6 TACACS+ Source
Interface Name
Enter the name of the IPv6 TACACS+ source interface here.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
Click the Back button to return to the previous window.
To Next Page
Loading...
