DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
30
Login Method
This window is used to display and configure the login method for each management interface that this Switch
supports.
To view the following window, click Management > Login Method, as shown below:
Figure 4-6 Login Method Window
The fields that can be configured in Enable Password are described below:
Parameter Description
Level
Select the privilege level for the user here. The range is from 1 to 15.
Password Type
Select the password type for the user here. Options to choose from are:
• Plain Text - Specifies that the password will be in the plain-text form. This is
the default option.
• Encrypted - Specifies that the password will be in the encrypted form based
on SHA-1.
Password
Enter the password for the user account here. In the plain-text form, the password
can be up to 32 characters long, is case-sensitive, and can contain spaces. In the
encrypted form, the password must be 35 bytes long and is case-sensitive.
Click the Apply button to accept the changes made.
Click the Edit button to re-configure the specified entry.
The fields that can be configured in Login Method are described below:
Parameter Description
Login Method
After clicking the Edit button this parameter can be configured. Select the login
method for the specified application here. Options to choose from are No Login,
Login and Login Local. No Login, as the name implies, requires no login
authentication to access the specified application. Login will require the user to at
least enter a password when trying to access the application specified. Login
Local requires the user to enter a username and a password to access the
specified application.
Click the Apply button to accept the changes made.
The fields that can be configured in Login Password are described below:
To Next Page
Loading...
