DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
414
Figure 11-23 External Alarm Settings Window
The fields that can be configured in External Alarm Trap Settings are described below:
Parameter Description
External Alarm Trap State
Select to enable or disable the external alarm trap state here.
Click the Apply button to accept the changes made.
The fields that can be configured in External Alarm Settings are described below:
Parameter Description
Unit
Select the Switch unit that will be used for this configuration here.
Channel
Select the channel to be configured here. The range is from 1 to 4.
Message
Enter the alarm message associated with the channel here. This string can be up
to 128 characters long.
Click the Apply button to accept the changes made.
Click the Default button return the entry to the default settings.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
To Next Page
Loading...
