D-Link DXS-3400 SERIES - Page 448

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
438
Log Description Severity
Event description: Login failed due to AAA server timeout or improper configuration.
Log Message: Login failed through <exec-type> from <client-ip> due to AAA server
<server-ip> timeout (Username: <username>).
Parameters description:
exec-type: It indicates the EXEC types, e.g.: Console, Telnet, SSH, Web, Web(SSL).
client-ip: It indicates the client’s IP address if valid through IP protocol.
server-ip: It indicates the AAA server IP address if authentication method is remote server.
username: It indicates the username for authentication.
Warning
Event description: Enable privilege successfully.
Log Message: Successful enable privilege through <exec-type> from <client-ip>
authenticated by AAA <aaa-method> <server-ip> (Username: <username>).
Parameters description:
exec-type: It indicates the EXEC types, e.g.: Console, Telnet, SSH, Web, Web(SSL).
client-ip: It indicates the client’s IP address if valid through IP protocol.
aaa-method: It indicates the authentication method, e.g.: none, local, server.
server-ip: It indicates the AAA server IP address if authentication method is remote server.
username: It indicates the username for authentication.
Informational
Event description: Enable privilege failure.
Log Message: Enable privilege failed through <exec-type> from <client-ip> authenticated
by AAA <aaa-method> <server-ip> (Username: <username>).
Parameters description:
exec-type: It indicates the EXEC types, e.g.: Console, Telnet, SSH, Web, Web(SSL).
client-ip: It indicates the client’s IP address if valid through IP protocol.
aaa-method: It indicates the authentication method, e.g.: none, local, server.
server-ip: It indicates the AAA server IP address if authentication method is remote server.
username: It indicates the username for authentication.
Warning
Event description: the remote server does not respond to the enable password
authentication request.
Log Message: Enable privilege failed through <exec-type> from <client-ip> due to AAA
server <server-ip> timeout (Username: <username>).
Parameters description:
exec-type: It indicates the EXEC types, e.g.: Console, Telnet, SSH, Web, Web(SSL).
client-ip: It indicates the client’s IP address if valid through IP protocol.
server-ip: It indicates the AAA server IP address if authentication method is remote server.
username: It indicates the username for authentication.
Warning
Event description: RADIUS assigned a valid VLAN ID attributes.
Log Message: RADIUS server <server-ip> assigned VID: <vid> to port <interface-id>
(Username: <username>)
Parameters description:
server-ip: It indicates the RADIUS server IP address.
vid: The assign VLAN ID that authorized by from RADIUS server.
interface-id: It indicates the port number of the client authenticated.
username: It indicates the username for authentication.
Informational
Event description: RADIUS assigned a valid bandwidth attributes.
Log Message: RADIUS server <server-ip> assigned <direction> bandwidth: <threshold>
to port < interface -id> (Username: <username>)
Parameters description:
server-ip: It indicates the RADIUS server IP address.
direction: It indicates the direction for bandwidth control, e.g.: ingress or egress.
threshold: The assign threshold of bandwidth that authorized by from RADIUS server.
interface-id: It indicates the port number of the client authenticated.
Informational