D-Link DXS-3400 SERIES - Page 89

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
79
Figure 4-71 IP Source Interface Window
The fields that can be configured in IP TFTP Source Interface are described below:
Parameter Description
Source Interface State
Select to enable or disable the IP TFTP source interface’s state here.
Interface Type
After enabling the Source Interface State option, select the interface type here.
Options to choose from are Loopback, Mgmt, and VLAN.
VID
Enter the interface’s ID here. For loopback interfaces this value is from 1 to 8. For
the management interface (Mgmt) this value can only be 0. For VLAN interfaces
this value is from 1 to 4094.
Click the Apply button to accept the changes made.
The fields that can be configured in IP FTP Source Interface are described below:
Parameter Description
Source Interface State
Select to enable or disable the IP FTP source interface’s state here.
Interface Type
After enabling the Source Interface State option, select the interface type here.
Options to choose from are Loopback, Mgmt, and VLAN.
VID
Enter the interface’s ID here. For loopback interfaces this value is from 1 to 8. For
the management interface (Mgmt) this value can only be 0. For VLAN interfaces
this value is from 1 to 4094.
Click the Apply button to accept the changes made.
The fields that can be configured in IP RCP Source Interface are described below:
Parameter Description
Source Interface State
Select to enable or disable the IP RCP source interface’s state here.
Interface Type
After enabling the Source Interface State option, select the interface type here.
Options to choose from are Loopback, Mgmt, and VLAN.
VID
Enter the interface’s ID here. For loopback interfaces this value is from 1 to 8. For
the management interface (Mgmt) this value can only be 0. For VLAN interfaces
this value is from 1 to 4094.
Click the Apply button to accept the changes made.