117D-Link M15 User Manual
Section 8 - Troubleshooting
2. What can I do if I forgot my password?
If you forgot your password, you must reset your router. This process will change all your settings back to the factory de-
faults.
To reset the router, locate the reset button (hole) on the rear panel of the unit. With the router powered on, use a paperclip
to hold the recessed button down until the Status LED turns red. Release the button and the router will go through its re-
boot process. Wait about 30 seconds to access the router. The address of the web conguration is printed on the device la-
bel on the bottom of the device. You may also enter the default IP address: 192.168.0.1. When logging in, enter the default
device password printed on the device label too.
To Next Page
Loading...
