D-Link EAGLE PRO AI AX1500 M15 - Page 76

72D-Link M15 User Manual
Section 3 - Conguration
System Log (Continued)
To E-mail
Address
Enter the recipient's email address.
SMTP Server
Address
Enter the SMTP server address.
SMTP Server
Port
Enter the SMTP server port. The default is 25.
Enable
Authentication
Enable this if your SMTP server requires authentication.
Account Name Enter your SMTP account name.
Password Enter your SMTP account password.
E-mail Log When Full or On Schedule
Send When Log
Full
If enabled, this option will set the device to send the log when the
log buer is full. The email account for sending logs is congured in
the above section.
Send on
Schedule
If enabled, this option will set the device to send the log according
to a set schedule periodically, so the administrator is always up to
date on the operation of the device. The email account for sending
logs is congured in the above section.
Schedule If you enable Send On Schedule, use the drop-down menu to select
a schedule to apply. The schedule may be set to Always Enable, or
you can create your own schedules on the Schedule page. Refer to
Time & Schedule - Schedule on page 70 for more information.
Click Save when you are done.