9D-Link DHP-700AV User Manual
Section 2 - Installation
Understanding PowerLine AV2 2000 Gigabit Adapter Security
The PowerLine AV2 2000 Gigabit Adapters on the same network must use an identical encryption key. The default encryption
key of each PowerLine AV2 2000 Gigabit Adapter is HomePlugAV. All PowerLine AV2 2000 Gigabit Adapters with the default
encryption key can communicate with each other.
It’s recommended to create a private encryption key for network security purpose. The private encryption key allows you to
protect your network from unauthorized access via the PowerLine network. To create a private encryption key instead of the
default encryption key, please follow the steps below:
1. All Adapters
Plug in all the adapters to be congured. Each device’s encryption key should be set to HomePlugAV (default value). If devices
do not connect the encryption key may not be set to the default value, press the reset button for 5 seconds to reset it to the
default value.
2. First Adapter
Press the Simple Connect Button on the rst adapter for no more than three seconds.
The Power LED will start blinking after you release the button. The adapter will create a private, randomly generated encryption
key that each PowerLine AV2 2000 Gigabit Adapter will use.
Push Button Security
To Next Page
Loading...
