D-Link Vonage - Page 8

13
8.
Now turn on your computer, open your web browser and
check your Internet connection by visiting any website.
• If your Internet connection works,
go to Step 4: Connect Your Phone, on page 14.
• If your Internet connection doesn't work,
go to Troubleshooting on page 17.
6. If a router is present, plug its power cord back into an
electrical power outlet.
7.
Using the Power Cord that came with your Vonage kit,
plug the smaller end of the Power Cord into the circular
Power Port on the back of the Vonage Device. Then plug
the larger end of the Power Cord into an electrical
power outlet.
NOTE: Before continuing, the “Power” and “Internet” lights on the front
of the Vonage Device should both turn on. Wait until the “Power” light
stops blinking and both “Power” and “Phone 1” lights are solid. The
“Phone 2” light will be solid if you have a second Vonage line. Otherwise,
it will not light. The “Internet” light will flicker whenever there is activity.
Step 3: Set up your new Vonage Router
12
Vonage Device