D-Link xStack DES-3528 Series - Page 517

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
517
enable authorization
Purpose
This command is used to enable authorization.
Syntax enable authorization attributes
Description
This command is used to enable authorization.
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
This example sets authorization global state enabled:
DES-3528:admin# enable authorization attributes
Command: enable authorization attributes
Success.
DES-3528:admin#
disable authorization
Purpose
This command is used to disable authorization.
Syntax disable authorization attributes
Description
This command is used to disable authorization.
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
This example sets authorization global state disabled:
DES-3528:admin# disable authorization attributes
Command: disable authorization attributes
Success.
DES-3528:admin#
show authorization
Purpose
This command is used to display authorization status.
Syntax show authorization
Description
This command is used to display authorization status.
Parameters
None.
Restrictions
None.
Example usage:
This example displays authorization status:
DES-3528:admin# show authorization
Command: show authorization
Authorization for Attributes: Enabled.
DES-3528:admin#