EasyManua.ls Logo

Da Vinci Hypermax OXYGEN - Mode Options

Da Vinci Hypermax OXYGEN
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Continuous Working Mode - By pressing the ON/OFF button, oxygen
will begin to flow from the oxygen concentrator, using a "continuous"
working state (will stay on until you manually turn it off). The LCD screen
will display the total usage time your generator has been used (like a car
odometer).
Timer Working Mode - Once the oxygen has begun flowing, press the
"timing+" button - this will allow the unit to begin in the timed working
mode. Each time the "timing+" button is pressed, the preset time will be
increased by 10 minutes. The maximum preset time is 480 minutes. By
pressing the "timing-" button, the preset time will decrease, in
increments of 10 minutes.
davin
cimedicalusa.com
7
MODE OPTIONS
(Continuous and Timer)
The Da Vinci 10 LPM Oxygen Concentrator has two different mode options
available: