Dacia DUSTER 2024 - Page 101

TRIP COMPUTER
2
Getting to know your vehicle - 99
Press the 1 switch to browse between
the zones and select the functions by
repeatedly pressing the 2 or 3 switch
es. Press switch 4 toreturntothepre
vious menu (the display depends on
the vehicle equipment and country):
f)Triplog,operatingfaultandinforma
tion message readout;
b) Trip settings:
– average consumption;
– current fuel consumption;
– estimatedmileagewithremainingfu
el;
– mileage;
– average speed;
– average LPG consumption;
– estimated range with remaining LPG
fuel;
– LPG distance;
c) trip mileage recorder and average
speed;
d) reset the tyre pressures;
e) set the time;
f) mileage before service:
– distance before service;
– mileage before oil change.
g) estimated range with remaining
reagent.
Resetting the trip mileage recorder
andjourneyparameters(resetbut
ton)
With the display showing one of the
trip settings, press and hold switch 4
"OK" until the display is reset to zero.
Interpreting some of the values
displayed after resetting
Thevaluesshowingaveragefuelcon
sumption, range and average speed
will become more stable and reliable
the further you travel after pressing the
reset button.
For the first few miles after pressing
the reset key you will notice that the
range increases as you travel.
Thisrangetakesintoaccounttheaver
age fuel consumption since the last
time the reset button was pressed.
However, average consumption can
decrease when:
– the vehicle stops accelerating;
– the engine reaches its operating
temperature (if the engine was cold
when the reset key was pressed);
– whendrivingfromanurbanareaon
to the open road.
Automatic resetting of the journey
parameters
Resetting occurs automatically when
themaximumvalueofanyofthepara
meters is exceeded.