TRIP COMPUTER
2
114 - Getting to know your vehicle
Vehiclesnotfittedwithamultime
dia screen
Accessing the settings menu on
display
2
(depending on the vehicle)
– With the vehicle stationary, press
the switch
3
asmanytimesasre
quired to reach the tab;
or
– depending on the vehicle, press
switch
3
and repeatedly press control
4
or
5
to reach the tab;
– press switch
6
"OK";
– repeatedly press control
4
or
5
to
reach the menu, then press the
6
"OK" switch.
Adjusting the settings
Navigate using control
4
or
5
to select
the function to be modified and press
control
6
"OK" to confirm (display may
vary according to vehicle equipment
and country):
a) "DASHBOARD":
– Language;
– Unit;
b) "VEHICLE":
– Rear windscreen wiping in reverse
gear;
– Automatic windscreen wiping;
– Front-rear drip wiping function;
– Exterior welcome;
c) "PARKING ASSIST":
– Beep volume;
d) "DRIVING ASSIST":
– Lanedeparturewarningsoundvol
ume;
– Lane departure warning sensitivity;
– Lane departure warning vibration;
– Lane Keep Assist sensitivity;
– Blind spot;
– Active braking;
– Speed warning;
– Distance warning;
– ...
e) "LIGHTING":
– Courtesy light auto mode;
– Automatic follow-me-home lighting;
– Followmehomelighting:XXsec
onds.
f) "ACCESS":
– Lock doors during driving;
– Opening/Closing in hands-free
mode;
– Unlock the driver's door only;
– Automatic re-locking;
– Silent locking;
– Automatic opening/closing;
– AutomaticDeploymentofDoorMir
rors;
g) "RESET".
function activated
function deactivated
Once a line has been selected, press
the switch
6
"OK"tomodifythefunc
tion.
If you select either "PARKING ASSIST"
then "VOLUME" or "DASHBOARD"
then "LANGUAGE", you will have to
make a further selection (Park Assist
soundvolumeorinstrumentpanellan
guage).Inthiscase,makeyourselec
tion and confirm it by pressing the
switch
6
"OK", the selected value is
shown by a in front of the line.