LIGHTING AND SIGNALS
2
130 - Getting to know your vehicle
Table of adjustment position examples
Examples of positions for adjusting the control
A
according to the
load
4x4 Combustion
versions
4x2 Combustion
versions
Hybrid4x4ver
sions
Hybrid4x2ver
sions
Driver alone or with front passenger 0 0 0 0
Driver with one front passenger and three rear
passengers
1 1 1 1
Driver with one passenger in the front, three
passengers in the back, and baggage (or load)
reaching the maximum permissible all-up
weight
2 2 2 2
Driver only and with luggage (or load) reach
ing the maximum authorised load weight
3 3 3 3
The table below gives some examples. In all cases, adjust the control
A
according to the vehicle load so that the road can be
seen and other drivers are not dazzled.
To Next Page
Loading...
