GEAR CONTROL
3
160 - Driving
Withthevehiclestationaryandthese
lector lever
1
in P position, start the
vehicle.
On the Hybrid version, the READY
message appears on the instrument
panel.
With your foot on the brake pedal (the
warning light
4
disappears from the
display), exit P position and engage D
position.
The lever must only be shifted to D,
B or R position while the vehicle is
stationary, your foot is on the brake
and the accelerator pedal is re
leased.
The READY warning light is
displayed on the instrument
panel to indicate that the
Hybrid system is in operation and
ready for driving 🡺149, 🡺151.
Operation
Shift the selector lever
1
one or two
notchesforwardsorbackwardstoen
gage the desired position (R, N, D or
B),thenreleasetheleveranditwillre
turn to its stable position.
The position engaged lights up on the
instrument panel.
If certain conditions prevent shifting
fromonepositiontoanother,there
questedpositionflashesontheinstru
ment panel.
To engage position P
Withthevehiclestationaryandtheen
gine running or the ignition on, press
the button
2
to engage P position. The
warning light on button
2
appears in
orange once the Park Ppositionisen
gaged on the gearbox.
To disengage position P
Withthevehiclestationaryandtheen
gine on, press the brake pedal and,
move the
1
selector lever forwards or
backwards according to the position
desired. The
2
button warning light
switches off.
If the brake pedal is not fully pressed,
the "Press brake pedal" message and
warning light are displayed on
the instrument panel.