TRANSMISSION: 4-WHEEL DRIVE
3
190 - Driving
To activate this mode, turn the selector
2
to "ECO" position
3
: the light on the
selector comes on and the " "
warninglightisdisplayedontheinstru
ment panel
1
toconfirmthatitisacti
vated.
"ECO" mode automatically distributes
the engine torque between the front
andrearaxlesaccordingtotheroad
holding conditions and the vehicle
speed.
Note:whendriving(e.g.whenovertak
ing), it is possible to temporarily regain
theengine'soptimumaccelerationca
pabilities.Todothis,presstheacceler
ator pedal firmly and fully. "ECO" mode
is reactivated when you ease off the
accelerator pedal.
To change modes, turn the selector
2
to a different position. The " "in
dicatorlightdisappearsfromtheinstru
ment panel
1
to confirm deactivation
and the newly activated is displayed.
"AUTO" mode
"AUTO " mode is the default mode to
be used on the road.
It is a versatile mode that covers the
majority of uses intended for the usual
road conditions.
Use this mode on paved roads or
when towing (trailer, caravan, etc.).
To activate this mode, turn the selector
2
to "AUTO" position
4
: the light on
the selector comes on and the "AUTO"
indicatorlightisdisplayedonthein
strument panel
1
to confirm that it is
activated.
"AUTO" mode automatically distributes
the engine torque between the front
andrearaxlesaccordingtotheroad
holding conditions and the vehicle
speed.
This mode optimises road holding.
To change modes, turn the selector
2
to a different position. The "AUTO"dis
play disappears from the instrument
panel
1
to confirm deactivation and
the newly activated mode is displayed.
"SNOW" mode
"SNOW" mode allows you to optimize
yourvehicle'selectronicstabilitypro
gram on slippery roads (snow, ice,
etc.).
The electronic stability control ESC
and traction control interventions are
enabledandthesteeringforceisin
creased.
Use this mode on paved and slip
pery roads.
Note: the use of "SNOW" mode is not
suitable in certain driving situations (on
soft ground, deep snow, mud, sand,
etc.).