ADDITIONAL DRIVING AID FUNCTIONS
3
200 - Driving
My Safety
The"MySafety"functioncanbeused
todeactivateoractivateasetofdri
vingassistancefunctionssimultane
ously.
Depending on the vehicle, you can
configure the "My Safety" function from
themultimediascreenorfromthein
strument panel by selecting the driving
aid functions to be switched off as a
group.
Operation
"ALL ON " mode
Depending on the vehicle, this mode
includesthefollowingdrivingassis
tance functions:
– overspeed sound alert 🡺228;
– lane departure prevention 🡺201;
– driver vigilance warning 🡺226;
– blind spot warning 🡺209;
When "ALL ON" mode is activated: the
indicator light on button
1
lights up and
the"MySafetyAllONselected"mes
sage appears on the instrument panel
to confirm this. The driving aids that
areavailableinthemodeareactivat
ed.
"Perso " mode
This mode can be used to deactivate
or reactivatesomedrivingaidfunc
tions that are available in the "ALL ON"
mode previously configured via the
"My Safety Perso" settings.
With the ignition on, press button
1
twice in succession to activate "Perso"
mode.
The first time you press it, the "Press
again for My Safety Perso" message
appears on the instrument panel. On
the second press, the indicator light on
the button
1
goes out. "Perso" mode is
activated. The "MySafetyPersose
lected"messageisdisplayedonthein
strument panel.
To switch back to "ALL ON" mode,
press once on button
1
. The indicator
light on button
1
lights up.
Depending on the vehicle
and on the length of time
sincethelasttimetheen
gine was stopped, the "ALL ON"
mode is reactivated:
– when the vehicle is unlocked;
or
– when a door is opened;
or
– when the engine is restarted.
Configuration of My Safety Perso
For safety reasons, carry
out any adjustments
whilethevehicleissta
tionary.