ADDITIONAL DRIVING AID FUNCTIONS
3
228 - Driving
– With the vehicle stationary, press
switch
6
as many times as required to
reach the tab;
or
– press switch
6
and repeatedly press
control
7
or
8
to reach the
menu;
– press switch
9
"OK";
– repeatedly press control
7
or
8
to
reach the menu, then press the
switch
9
"OK";
– repeatedly press control
7
or
8
to
reach the "DRIVING ASSIST" menu,
then press switch
9
"OK";
– repeatedly press control
7
or
8
to
reach the "Vigilance warning" menu,
then press switch
9
"OK";
– press the
9
"OK"switchagaintoac
tivate or deactivate the alerts:
– warnings enabled;
– warnings deactivated.
Limitations of system operation
Someconditionscandisruptordam
age the operation of the system, for
example:
– certaindrivingstyles(incorrectdri
ving);
– driving on a road in poor condition;
– strong side wind;
– theclockiswronglyconfigured(de
pending on vehicle) 🡺115;
– winding roads;
– trailer traction.
Operating faults
Ifthesystemdetectsafault,the"Vigi
lance monit. to check" message and
the warning light are displayed
on the instrument panel.
Havethesystemcheckedbyanautho
rised dealer.
Detection of road signs
The system displays speed limits on
the instrument panel according to road
signs detected on the side of the road.
It mainly uses information taken from
the camera
1
attachedtothewind
screen behind the rear view mirror.
Depending on the country, the system
alsousesinformationfromamapsub
scription to interpret certain signs
(town entrance, etc.).
The sign displayed on the instrument
panelchangeswhenaroadsignisde
tected by the system.
Oncethespeedlimiter,thecruisecon
trol or, depending on the vehicle, the
Stop and Go adaptive cruise control is