Dacia DUSTER 2024 - Page 233

ADDITIONAL DRIVING AID FUNCTIONS
3
Driving - 231
Activating, deactivating the over
speed sound alert from the trip
computer
(depending on the vehicle)
– With the vehicle stationary, press
switch 6 as many times as required to
reach the tab;
or
– press switch 6 and repeatedly press
control 7 or 8 to reach the
menu;
– press switch 9 "OK";
– repeatedly press control 7 or 8 to
reach the menu, then press the
switch 9 "OK";
– repeatedly press control 7 or 8 to
reach the "DRIVING ASSIST" menu,
then press switch 9 "OK";
– repeatedly press control 7 or 8 to
reach the "Speed alert" menu, then
press switch 9 "OK";
– press switch 9 "OK"againtoacti
vate or deactivate the sound alert:
– alert activated;
– alert deactivated.
Variation of the limited speed or
cruising speed
Toadaptthespeedlimiter,cruisecon
trol or, depending on the vehicle, the
Stop and Go adaptive cruise control
setpoint to the detected speed limit,
press switch 10 .
Temporary unavailability
If the system is unavailable for reasons
related to the camera or map data, the
symbolor,dependingontheve
hicle, the yellow symbolisdis
played on the instrument panel. If
thereisstillaproblem,contactanap
proved dealer.
The system cannot detect the speed
limit if:
– the windscreen is not clean;
– the camera is blinded by the sun;
– there is insufficient visibility (fog,
etc.);
– the signs are not legible (snow, etc.)
or are hidden (by another vehicle or by
trees);
– map information is not up to date.
Note:whenthefrontcameraisob
scured, the "Front camera no visibility"
message appears on the instrument
panel. Clean the windscreen area in
front of the camera.
Operating faults
When the system detects an operating
fault, the or, depending on the