STOP AND GO ADAPTIVE CRUISE CONTROL
3
242 - Driving
11.
Stored safe distance
12.
Vehicle in front.
The camera should be
kept clean and free of
anymodificationsinor
der to ensure the proper
operation of the system.
Switching on
Press switch
6
asmanytimesasre
quired to select the adaptive cruise
control Stop and Go.
The warning light
9
appears in
greyandthe"AdaptiveCruiseCtlse
lected"messageappearsonthein
strumentpanelaccompaniedbydash
estoindicatethatthefunctionisacti
vated and waiting to store a cruising
speed.
This function cannot be activated
when:
– the parking brake is applied;
– the Park Assist function is already
activated 🡺252.
The "Adaptive Cruise Ctl unavailable"
messageisdisplayedontheinstru
ment panel.
Activating cruise control
With the vehicle stationary or moving
at a steady speed, press switch
3
(SET/+) or
2
(SET/˗) to activate the
function and store the current speed.
The minimum cruising speed is 19
mph (30 km/h).
The cruising speed
10
replaces the
dashesandthecruisecontrolopera
tion is confirmed by the appearance of
thecruisingspeedingreenandwarn
ing light
9
.
If you attempt to activate the function
at a speed over 99 mph (160 km/h),
the "Invalid Speed" message appears
and the function remains deactivated.
Once a cruising speed is memorised
andthecruisecontrolfunctionisac
tive,youmayliftyourfootofftheaccel
erator pedal.
Note: if your vehicle speed is lower
thanabout19mph(30km/h),thefunc
tion uses a default cruising speed of
19mph(30km/h).Thevehiclewillac
celerate until it reaches the stored
cruising speed.
Important: you should
keep your feet near the
pedals at all times to
prepare for any event.
Activating cruise control with
speed limit sign recognition
If the vehicle is equipped with the
"Road sign detection" function 🡺228,
press switch
4
to adapt the vehicle's
speed to the speed limits
13
detected
by the camera.
When passing the sign, the cruising
speed
10
adoptsthevalueofthede
tected speed
13
.