STOP AND GO ADAPTIVE CRUISE CONTROL
3
Driving - 251
In the event of the system behaving abnormally, deactivate it and contact an authorised dealer.
In the event of system disturbance
Some conditions can disturb or damage the system's operation, such as:
– windscreen obscured (by dirt, ice, snow, etc.);
– poor weather conditions (snow, heavy rain, hail, black ice, etc.);
– poor visibility (night, fog, etc.);
– poor contrast between the vehicle preceding it and the surrounding area (e.g. white vehicle in a snowy area, etc.);
– being dazzled (glaring sun, lights of vehicles travelling in the opposite direction; etc.);
– narrow, winding or undulating road (tight bends, etc.);
– a slower vehicle with a significant difference in speed;
– use of mats not adapted to the vehicle. On the driver's side, only use mats suitable for the vehicle, attached with the pre-
fitted components, and check the fitting regularly. Do not lay one mat on top of another. There is a risk of wedging the
pedals.
In these cases, the system may wrongly intervene.
Risk of unwanted braking or acceleration.
Manyunforeseensituationsmayaffectthesystemoperation.Certainobjectsorvehiclesthatappearinthecameradetec
tion zone may be interpreted by the system incorrectly, possibly leading to inappropriate acceleration or braking.
You should always be attentive to sudden events that might occur while you are driving. Always keep your vehicle
under control by keeping your feet near the pedals, so that you are ready to act in any event.
To Next Page
Loading...
