Dacia DUSTER 2024 - Page 277

AIR VENTS, HEATING AND AIR CONDITIONING
4
Your comfort - 275
The air flow is directed to the
dashboard vents.
The air flow is directed towards
the dashboard vents and the footwells.
The air flow is directed mainly
towards the footwells.
Theairflowisdistributedbe
tween front side window demisting
vents, the windscreen demisting vents
and the footwells.
All the air is then directed to the
windscreen and front side window
demisting vents.
Switching the air conditioning on or
off
Theairconditioningisswitchedon(in
dicator light lit) or off (indicator light off)
using button 2
Activation is not possible if the 3 con
trol is set to 0.
The air conditioning system is used
for:
– lowering the temperature inside the
passenger compartment;
– eliminating condensation more
quickly.
The air conditioning does not operate
when the exterior temperature is low.
Fuelconsumptionincreas
eswhentheaircondition
ing is being used (switch it
off when it is not required).
System B
Controls
The controls will depend on the vehicle
equipment level.
1. Distribution of air.
2. Switching air conditioning on or off.
3. Adjusting the ventilation fan speed.
4. De-icing/demisting of the rear
screen and, depending on the vehicle,
the rear view mirrors.
5. Adjusting the air temperature.
6. Switching passenger compartment
isolation mode/air recirculation mode
on
Information and advice for use
🡺280.
Adjusting the air temperature
Turn control 5 to obtain the desired
temperature. The further towards the
redtheslideis,thehigherthetemper
ature will be.
Adjusting the ventilation fan speed
Move control 3 from 0 to 4. The further
the control is positioned to the right,
thegreatertheamountofairblownin
to the passenger compartment. To stop
airfromenteringthepassengercom
partment, set the 3 control to "0".
Thesystemisdeactivated:theventila
tionspeedforthepassengercompart
ment air is zero (vehicle stationary),
you can however still feel a slight flow
of air when the vehicle is moving.
Prolongeduseofthiscon
trol in position 0 can lead to
condensation forming on
the side windows and windscreen
and problems due to the use of
non-renewed air in the passenger
compartment.