HEADLIGHTS, LIGHTS: REPLACING BULBS
6
354 - Practical advice
– unclip and release the bulb holder
8
using the tabs
9
;
– remove the bulb concerned.
Bulb type
10
: W5W.
Refitting
– Clip the lens
7
onto the bulb holder
8
;
– clip in the reading spot light unit
6
until it clicks;
– make sure that the reading spot
lights block is correctly positioned and
locked into place.
Rear reading spot light
11
(depending on the vehicle)
– Unclip the lens
12
using a tool such
as a flat-head screwdriver positioned
at area
C
;