HEADLIGHTS, LIGHTS: REPLACING BULBS
6
Practical advice - 355
– unclip and release the bulb holder
13
using the tabs
14
;
– remove the bulb concerned.
Bulb type
15
: W5W.
Refitting
– Clip the lens
12
onto the bulb holder
13
;
– clip in the reading spot light unit
11
until you hear the click;
– make sure that the reading spot
lights block is correctly positioned and
locked into place.
The bulbs are under
pressure and may break
when replaced.
Risk of injury.
Glovebox light
16
(depending on the vehicle)
Unclip the light
16
using a flat-blade
screwdriver or similar tool, pressing on
the tab
17
to move the light towards
the inside of the glovebox.
Disconnect the light.
Bulb type: W5W.
To Next Page
Loading...
