WIPER BLADES: REPLACEMENT
6
Practical advice - 357
Windscreen wiper blades
2
To replace the wipers, first put them in
the service position
B
.
With the ignition on and the engine
stopped:
– move the stalk
1
twice in succession
to position
A
(single sweep): the wiper
blades will stop in the service position
B
away from the bonnet;
– press the button
4
then remove the
blade upwards.
Refitting
To refit the wiper blade
2
, insert it into
its housing in the arm
3
, then clip it in
until you hear a click. Make sure that
thebladeiscorrectlylockedinposi
tion.
Toreturnthebladestotheloweredpo
sition, make sure that the blades are
folded down onto the windscreen then
set the stalk
1
to position
A
(single
sweep): the windscreen wiper blades
willfoldintothebonnetwhentheigni
tion is switched on.