FUSES
6
Practical advice - 359
Fuse box
If any electrical component does not
work, check the condition of the fuses.
Unclip the flap
A
using the notch
1
or,
depending on the vehicle, unclip the
flap
B
using the notch
2
.
Tweezers
3
Detach the fuse using the tweezers
3
,
located on the back of flap
A
or
B
.
To remove the fuse from the tweezers,
slide the fuse to the side.
It is not advisable to use the free fuse
locations.
Tocomplywithcurrentleg
islation, or as a precaution,
youcanobtainanemer
gency kit from your approved
dealer containing a set of spare
bulbs and fuses.
Checkthefuseinques
tion and replace it, if
necessary, with a fuse
of the same rating.
If a fuse is fitted with too high a
rating, it may cause the electrical
circuit to overheat (risk of fire) in
the event of an item of equipment
using an excessive amount of
current.
To Next Page
Loading...
