REAR SEATS
2
Getting to know your vehicle - 57
Rear headrests
Position for use
Lift the headrest fully until it locks.
Check that it is correctly locked.
To remove the headrest
Raise the headrest as far as it will go,
then press button
1
and remove the
headrest.
To refit the headrest
Enter the rods in their housing and
push down the headrest until it locks to
use it in the high position.
Check that it is correctly locked.
Storage position
2
for the headrest
Press button
1
and lower the headrest
completely.
The lowest position of the headrest
(position
2
) is a position for stor
age only: do not set it in this position
when the seat is occupied.
The headrest is a safety
component; check that it
isfittedandinthecor
rect position.
Rear bench seat: functions
To fold down the seatback
Ensure that the front seats are far
enough forward.
Lower the headrests fully 🡺57.
To Next Page
Loading...
