REAR SEATS
2
58 - Getting to know your vehicle
Place the seat belts in their guides
A
.
Pull the tab
1
and lower the seatback
B
.
Beforemovingtheseat
back, put seat belt in belt
guide
A
to avoid damaging
it.
Depending on the vehicle, to unlock
the bench seat
C
, simultaneously pull
the tabs
1
to unlock from the inside.
To replace the seatback, proceed in
the reverse order to removal.
Refit the seatback and click it back into
place.
For safety reasons, carry
out any adjustments
whilethevehicleissta
tionary.
When refitting the seat
back, make sure it is
correctly locked in place.
If seat covers are fit
ted,makesurethesedonotpre
venttheseatbacklatchfromlock
ing in.
Make sure that the seat belts are
positioned correctly.
Reposition the headrests.
When moving the rear
seats,ensurethatnoth
ingobstructstheanchor
age points (passenger's
arm or leg, a pet, gravel, cloth,
toys, etc.).
Check that the rear seat
belts are positioned and
operating correctly each
time the rear bench seat
is moved.
To avoid all risk of injury,
ensure that nobody is in
theproximityofthemov
ing parts.
Makesurethattheseat
back is correctly locked.
If necessary, remove any
obstacles behind the
seats. Repeat the procedure until
the seat is correctly locked.