CHILD SAFETY
2
78 - Getting to know your vehicle
The ISOFIX anchorage
pointshavebeenexclu
sively designed for child
seats with the ISOFIX
system. Never fit a different type
ofchildseat,seatbeltorotherob
jects to these fittings.
Check that nothing is obstructing
the anchorage points.
If your vehicle has been involved
in a road accident, have the
ISOFIX anchorage points
checked and replace your child
seat.
Attach the hook on the belt to one of
the rings
2
(version 4x2) or
3
(version
4x4).
Pull the belt so that the back of the
child seat comes into contact with the
back of the vehicle seat.
Note: it is essential to use the rings
marked with the symbol .
Check that the seatback
of the forward-facing
child seat is in contact
with the seatback of the
vehicle seat. In this case, the
child seat may not always rest on
the seat base of the vehicle seat.
The child seat strap
must be attached to the
corresponding ring.
To Next Page
Loading...
