WIPER
2
Rear windscreen wash, wiper
Rear windscreen wiper
With the ignition on, rotate the
ring
3
on the stalk
1
until the symbol is
opposite the mark
2
– slow continuous wiping
To stop the operation, rotate the ring
3
again.
Note:
When washing using a roller type car
wash, return the ring
3
on the stalk
1
to the stop position to deactivate wip-
ing.
Note:
At the end of use, remember to return
the ring
3
on stalk
1
to the off position,
so that wiping is not inadvertently acti-
vated during the next use.
Do not hold the wiper arm
when opening or closing
the luggage compartment
door.
Before taking any action
involving the rear screen
(washing the vehicle, de-
icing, cleaning, etc.) re-
turn the stalk
1
to the off position.
Risk of injury and/or damage.
Wiper blade performance
Check the condition of the
wiper blades. How long
they last depends on you:
– it must remain clean: clean the
blade and the screen regularly
with soapy water;
– do not use it when the screen is
dry;
– free it from the screen when it
has not been used for a long time.
In all cases, replace it as soon as
its performance is reduced: ap-
proximately once a year 🡺326.
Precaution for using the wipers
– In freezing or snowy conditions,
clear the screen before starting
the wipers (risk of motor over-
heating);
– ensure that no objects are ob-
structing the travel of the blade.
Activation/deactivation of the rear
screen wiper
Engaging reverse gear triggers inter-
mittent wiping (if the front wipers are
working). If your vehicle is equipped
with a vehicle settings customisation
off
–
intermittent wiping
The wipers will pause for several
seconds between sweeps. The wip-
ing frequency varies according to
the vehicle speed;
–
Getting to know your vehicle - 129
To Next Page
Loading...
