ADDITIONAL DRIVING AID FUNCTIONS
3
Display
C
First warning: the warning light
3
sig-
nals that a vehicle has been detected
in the blind spot area.
Display
D
When the direction indicator is activat-
ed, the warning light
3
flashes when a
vehicle is detected in the blind spot on
the side towards which you are about
to steer. If you cancel the direction in-
dicator, the function will return to the
initial warning (display
C
).
Because sensors have
been installed in the
bumpers, any work (re-
pairs, replacements,
touching up of paintwork) must be
carried out by a qualified profes-
sional.
Conditions for non-function
– If the object is not moving;
– if traffic is heavy;
– if the road is winding;
– if front and rear sensors both detect
an object at the same time (e.g. when
passing an articulated lorry);
– ...
Operating faults
If the system detects a fault, the mes-
sage“Checkblindspotalert”isdis-
played on the instrument panel. Call
an approved dealer.
Note: when the engine is started, the
warning light
3
, display
B
, flashes
three times. It is normal.
196 - Driving
To Next Page
Loading...
