CRUISE CONTROL
3
Switching on
Press the switch
1
.
The warning light
6
appears in grey or,
depending on the vehicle, the
7
ap-
pears in green.
The "Cruise control ON" message or,
depending on the vehicle, the
warning light appears on the instru-
ment panel accompanied by dashes to
indicate that the cruise control function
is operating and waiting to store a
cruising speed.
Activating cruise control
At a steady speed above approximate-
ly 19 mph (30 km/h), press switch
2
(SET/˗) or switch
3
(RES/+): the func-
tion is activated and the current speed
is taken into account.
The cruising speed replaces the dash-
es. The cruising speed is confirmed by
the appearance in white of the stored
speed and warning light
6
or, depend-
ing on the vehicle, the warning
light and warning light
8
in green in
addition to warning light
7
.
Depending on the vehicle, if you try to
activate the function below 18 mph (30
km/h), the message "Invalid Speed" is
displayed and function remains inac-
tive.
Driving
Once a cruising speed is registered
and the cruise control function is ac-
tive, you may lift your foot off the accel-
erator pedal.
Please note that you
must keep your feet
close to the pedals in or-
der to react in an emer-
gency.
Adjusting the cruising speed
The cruising speed may be changed
by repeatedly pressing the:
226 - Driving
To Next Page
Loading...
