CRUISE CONTROL
3
When the cruise control function is on
standby, pressing the switch
2
(SET/˗)
to reactivate the cruise control function
without taking into account the stored
speed: the speed at which the vehicle
is moving will be taken into account.
Switching off the function
The cruise control function is interrupt-
ed:
– when you press the
1
switch. In this
case, the speed is no longer stored;
– when you press the
5
switch. In this
case the speed limiter is selected and
there is no stored speed.
Warning light
6
or, depending on the
vehicle, warning light
7
or
8
disap-
pears from the instrument panel to
confirm that the function is deactivat-
ed.
Putting the cruise control
on standby or switching
it off does not cause a
rapid reduction in speed:
you must brake by pressing the
brake pedal.
228 - Driving
To Next Page
Loading...
