AIR VENTS, HEATING AND AIR CONDITIONING
4
Information and advice for use
🡺251.
Adjusting the air temperature
Turn control
5
to obtain the desired
temperature. The further towards the
red the slide is, the higher the temper-
ature will be.
Adjusting the ventilation fan speed
Move control
3
from 0 to 4. The further
the control is positioned to the right,
the greater the amount of air blown in-
to the passenger compartment. To stop
air from entering the passenger com-
partment, set the
3
control to "0".
The system is deactivated: the ventila-
tion speed for the passenger compart-
ment air is zero (vehicle stationary),
you can however still feel a slight flow
of air when the vehicle is moving.
Prolonged use of this con-
trol in position 0 can lead to
condensation forming on
the side windows and windscreen
and problems due to the use of
non-renewed air in the passenger
compartment.
Switching passenger compartment
isolation mode/air recirculation
mode on.
A warning light
7
lights up to confirm
operation.
Under these conditions, air is taken
from the passenger compartment and
is recirculated, with no air being taken
from outside the vehicle.
Prolonged use of air recir-
culation can lead to con-
densation forming on the
side windows and windscreen
and discomfort due to the lack of
fresh air in the passenger com-
partment.
You are therefore advised to re-
turn to normal mode (external air)
as soon as the air recirculation
function is no longer required, by
turning control 6 to the right.
Air recirculation operates as fol-
lows:
– isolating the vehicle from the exter-
nal atmosphere (e.g. when driving in
polluted areas, etc.);
– to bring the passenger compartment
to the desired temperature as quickly
as possible.
Rapid demisting
Turn controls
1
,
3
and
6
to positions:
– demisting ;
– maximum fan speed;
– external air.
Using the air conditioning increases
the speed of demisting.
Your comfort - 247
To Next Page
Loading...
