TRANSPORTING OBJECTS
4
the front seats when the rear seats are
folded down 🡺46 (example
B
).
Ensure that the objects being trans-
ported are evenly distributed through-
out the loading area.
If you have to place objects on the
folded seat back, it is vital that you re-
move the headrests before folding the
seat back so that it can be folded as
flat as possible against the seat.
Always position the
heaviest items directly
on the floor. If the vehicle
is equipped, use the
lashing points
1
located on the
luggage compartment floor. The
luggage should be loaded in such
a way that no items will be thrown
forward and strike the occupants
if the driver has to brake sudden-
ly. Fasten the rear seat belts,
even if the seats are not occu-
pied.
Luggage compartment storage
space and fittings
Mobile floor
1
Flat position
Enables you to flatten the floor by fold-
ing down the back of the rear bench
seat and to compartmentalise the boot
into two distinct spaces.
The mobile floor is positioned on the
runner
3
.
270 - Your comfort
To Next Page
Loading...
