HEADLIGHTS, LIGHTS: REPLACING BULBS
6
Refitting
– Clip the lens
2
onto the bulb holder
3
;
– clip in the courtesy light
1
until your
hear the click;
– ensure that the interior lights are
properly positioned and locked into
place.
The bulbs are under
pressure and may break
when replaced.
Risk of injury.
Front reading spot lights
6
(depending on the vehicle)
– Unclip the lens
7
using a tool such
as a flat-head screwdriver positioned
at
B
;
– unclip and release the bulb holder
8
using the tabs
9
;
– remove the bulb concerned.
Bulb type
10
: W5W.
Practical advice - 319
To Next Page
Loading...
