WIPER BLADES: REPLACEMENT
6
Rear screen wiper blade
5
The stalk in the off position (deactivat-
ed):
– lift the wiper arm
6
;
– pivot the blade
5
(movement
B
) un-
til it unclips;
– remove the blade by pulling it.
Refitting
To refit the wiper blade, proceed in the
reverse order to removal. Make sure
that the blade is correctly locked in po-
sition.
– In frosty weather,
make sure that the wiper
blades are not stuck by
ice (to avoid the risk of the motor
overheating).
– Check the condition of the
wiper blades. Replace the wiper
blades as soon as they begin to
lose efficiency (approximately
once a year).
Whilst changing the blade, take
care not to drop the arm onto the
window after it has been removed
as this may break the window.
Before changing the rear
wiper blade, make sure
the stalk is in the off po-
sition (deactivated).
Risk of injury.
Practical advice - 327
To Next Page
Loading...
