REAR SEATS
2
Rear headrests
Removing the headrests
A
or
B
Raise the headrest as far as it will go,
then press button
1
and remove the
headrest.
Adjusting the height of the headrest
B
(depending on the vehicle)
Press the button
1
and simultaneously
slide the headrest to the desired
height.
Refitting the headrests
A
or
B
Insert the rods in the holes, press but-
ton
1
, lower the headrest and check
that it is securely in place.
Headrest in use position
B
(depending on the vehicle)
Lift the headrest fully until it locks.
Check that it is correctly locked.
Storage position for the headrest
B
(depending on the vehicle)
Press button
1
and lower the headrest
completely.
The lowest position of the headrest
(position
C
) is for storage only: do
not set it in this position when the seat
is occupied.
The headrest is a safety
component, check that it
is fitted and in the cor-
rect position.
46 - Getting to know your vehicle