REAR SEATS
2
Rear bench seat: functions
To fold down the seatback
Ensure that the front seats are far
enough forward.
Lower the central headrest as far as it
will go.
Place the seat belts in their guides
A
.
Pull the tab
1
and lower the seatback
B
.
Before moving the seat-
back, put seat belt in belt
guide
A
to avoid damaging
it.
Depending on the vehicle, to unlock
the bench seat
C
, simultaneously pull
the tabs
1
to unlock from the inside.
To replace the seatback, proceed in
the reverse order to removal.
Refit the seatback and click it back into
place.
For safety reasons, carry
out any adjustments
while the vehicle is sta-
tionary.
When refitting the seat-
back, make sure it is
correctly locked in place.
If seat covers are fit-
ted, make sure these do not pre-
vent the seatback latch from lock-
ing in.
Make sure that the seat belts are
positioned correctly.
Reposition the headrests.
When moving the rear
seats, ensure that noth-
ing obstructs the anchor-
age points (passenger's
arm or leg, a pet, gravel, cloth,
toys, etc.).
Getting to know your vehicle - 47
To Next Page
Loading...
