EasyManua.ls Logo

Daewoo electricals SDA1210 - Page 3

Default Icon
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Always use this appliance on a solid, level, non-flammable
surface.
Do not use this appliance outdoors.
Do not use this Steam Station Iron with a programmer, timer,
separate remote-control system or any other device that
switches the appliance on automatically.
It is imperative to unplug the power cord after the appliance has
been used, before it is cleaned and whilst being repaired.
Repairs to electrical appliances should only be performed by a
qualified electrician. Improper repairs may place user at serious
risk.
Do not operate this appliance with a damaged plug or cord,
after a malfunction or after being dropped or damaged in any
way.
Regular, periodic checks should be carried out on the mains
cable to ensure no damage is evident. Should there be any
signs of damage the appliance should not be used.
If the power cable is damaged, it should only be replaced by the
manufacturer or a suitable qualified after-sales-service in order
to avoid a hazard
Do not allow the mains cable to hang over sharp edges or
come in contact with hot surfaces.
Do not run the mains cable under carpets, rugs, etc.
The Iron is not to be used if it has been dropped, if there are
visible signs of damage or it is leaking.
The plug must be removed from the socket outlet before the
reservoir is filled with water.
The filling aperture must not be opened during use.
Allow the unit to cool before storage.
Before cleaning, disconnect the appliance from the mains
supply and allow to cool.
This appliance is intended for household use only and should