20
2-1. Wash Program
1) Wash Programs
1 The default washing times and water levels apply for all the programs without sensing the load.
2) Wash Times
* Washing time after the water temperature reaches the target level.
1 The washing time consists of heating cycle and post-heating main wash cycle. The time displayed for
heating cycle elapses immediately on completion of heating cycle or remains unchanged until the heating
cycle is over.
2 The heating cycle is complete when the water temperature reaches the target level.
- If the water temperature doesn't reach the target level after the heating cycle under the TUB CLEAN,
BABY CARE, INTENSIVE, ORGANIC, program, the time on display stops declining and an additional
heating cycle applies for 10 minutes. If the water temperature doesn't reach the target level after the
additional cycle, the heating cycle is suspended and the main wash cycle starts.
3 The water heater does not resume its operation after it is turned off when the water temperature reaches the
target level.
1. MINI 2.0
2. Program Functions
CATEGORY
PROGRAM
WATER
LEVEL
TIME OF
WATER
SUPPLY
WASH1
(BEFORE-
HEATING)
(min)
WASH2
(HEATING)
(min)
WASH3
(AFTER-
HEATING)
(min)
TOTAL
WASH
TIME
(min)
NORMAL DEFAULT 2 3 0 3 8
DELICATE DEFAULT 2 5 0 6 13
NIGHT DEFAULT 2 5 0 7 14
QUICK WASH DEFAULT 2 3 0 0 5
TUB CLEAN(WASH) DEFAULT 2 5 15 5 27
BABY CARE DEFAULT 2 2 47 11 62
INTENSIVE DEFAULT 2 4 15 21 42
ORGANIC DEFAULT 2 2 24 0 28
WASH & DRY DEFAULT 2 3 0 3 8
TUB CLEAN(COMBO) DEFAULT 2 5 15 5 27
MINI 2.0_COMBO,WASH_영문_SM.indd 20 2017. 8. 25. 오전 11:16
To Next Page
Loading...
