105
TOILET (OPTION)
Control panel
Toilet operation control panel is fixed
at driver left side on the switch board.
Explanation of operation switch
1. Main power switch
This switch is electric energy sup-
plying to the toilet and toilet oper-
ation control panel.
2. Flushing switch (Commode)
Do use this switch when clean up
discharge waste from commode.
• Openning cutoff valve :
To push “OPEN” position.
• Shutting cutoff valve :
To push “CLOSE” position.
3. Feces tank warning lamp
When full at the tank, the lamp
turn on.
4. Feces tank cutoff valve switch
Douse this switch when discharge
waste from the toilet of feces tank.
• Openning cutoff valve :
Push button.
• Shutting cutoff valve :
Full button.
Do not use when lamp on (Feces
tank warning lamp) and discharge
waste from the tank at permitted
location.
CAUTION
To Next Page
Loading...